8 Ways To Fix DPC Watchdog Violation Error In Windows [2023]

Watchdog error in Windows is a common problem, and most Windows users face this problem once. If you are facing a stop code DPC watchdog violation error in Windows, then you might need to fix it asap. Although the dpc_watchdog_violation error or Windows doesn’t have a valid IP configuration does not pose any serious issues. It can turn off your system unexpectedly. There are many reasons you might get a DPC watchdog violation blue screen error, and the solution to fix Windows stop code DPC watchdog violation depends on why you are getting this error.

How To Fix DPC Watchdog Violation Error

Here in this post, we are going to tell you everything about the DPC watchdog violation Windows 10 and how to fix watchdog errors. You must not change any system settings or download any third-party tool to get rid of the DPC watchdog error, as it can be solved manually without any technical skills. We have compiled this list of dpc_watchdog_violation 2023 fix after trying all of these methods ourselves. After following every Windows 10 watchdog violation fix, you must restart your device in order to make changes to the system files and settings.

What Is DPC Watchdog Violation Error

As we told above, the BSOD DPC watchdog violation is a Windows error that re-starts your system automatically. This error falls in the “Blue Screen of Death” error category as you will get a blue screen on your screen with this stop code printed on it. If you have installed a new program recently and started getting this error, you already know who is the culprit is.

Third-party software is not always behind DPC watchdog violation error 0x00000133 or device descriptor request failed, as it can be caused because of hardware failure. Apart from the general fixes for error code: DPC_Watchdog_Violation, we have also mentioned the major causes of this problem so you can try fixing it yourself without reading any guide.

DPC_Watchdog_Violation Causes

You already know the dpc_watchdog_violation meaning by now, but many of you might not know what actually causes BSOD or DPC_Watchdog_Violation error. Well, to be honest, it can be anything from a connected hardware device to the latest installed software, compatibility of a tool you are trying to run, changes in system settings, etc. Here are a few of the major reasons why you might get MSDN bugcheck dpc_watchdog_violation error on Windows 10/8.1/7.

  • Outdated or damaged installed drivers.
  • The hardware is not compatible.
  • System files are corrupted.
  • Software is not made to run on your system.
  • The firmware of the SSD is outdated.

How To Fix DPC Watchdog Violation Windows 10/8.1/7 Error

Remove All External Devices

Remove All External Devices

External devices can also cause DPC watchdog violation Windows 8, and if you are experiencing a BSOD problem a lot, then you can try removing those devices. It doesn’t matter if it is a mouse, keyboard, external hard disk, printer, or anything else; you must remove every device once to check if one of them is causing the issue.

Once unplugged, start plugging one device at a time and try to spend some time on your machine to figure out the faulty hardware. Once you have figured out the device, you can either re-install its drivers again or change the settings to default. Our recommendation will be to roll back its drivers to a prior version.

Run SFC & CHKDSK Commands

Another good way to fix the dpc_watchdog_violation Windows 10 freeze problem is by running Check Disk, and System File checker commands. Yes, you can fix the DPC watchdog violation with CMD by running these two commands. Not only is BSOD watchdog violation, but you can also solve a few other Windows errors with these commands. Here’s how to use them:

  • Open search and type CMD.
  • Right-click on the CMD and click Run As Administrator.
  • Type the below command in the window and press Enter.
sfc /scannow

(If the above fails, then try this one)

sfc /scannow /offbootdir=c:\ /offwindir=c:\windows 
SFC CHKDSK Command Windows
  • Wait for the process to finish.
  • Once it is done, restart your device.
  • Now, open the CMD again with administrative rights.
  • Type the below command and press Enter.
chkdsk c: /f /r

When you are done running both commands, restart your device again to check if the DPC watchdog violation overclock problem has been solved or not.

Turn off Fast Start-up

By default, Windows comes with settings that help itself in performing better. “Fast Start-up” is one of those settings that can affect your system in certain manners. If you are experiencing Windows 10 DPC Watchdog Violation blue screen error often, then you can try disabling this feature. There are very few chances that a fast start-up is affecting your PC when it comes to performance, but users have reported they were able to fix this BSOD DPC watchdog violation after disabling this setting. Here’s how you can do it:

  • Open Control Panel (not Settings).
  • Click on Hardware and Sound.
  • Search for Power Options.
  • Click on Change What The Power Buttons Do.
  • Under Shutdown Settings, you will find an option for Fast Start-up.
Turn Off Fast Start Up
  • Uncheck this option and click on Save Changes.
  • Restart your system, and see if this has solved your problem.

If this setting is greyed out and you can’t change it, then click on Change Settings That Are Currently Unavailable option above.

Update Firmware of SSD

SSD or Solid State Drive makes PC fast but sometimes can cause DPC watchdog errors too. You can visit your SSD’s manufacturer’s website and download the latest version of firmware for it. Installing the latest SSD firmware will solve almost all issues related to hard disks, including DPC Watchdog Violation.

If you are not sure about the manufacturer name of your SSD, then you can find it easily using the Disk Management tool. Here’s how to do it:

  • Press Windows Key + R to open the RUN box.
  • Type devmgmt.msc and press Enter.
  • The Device Manager window will appear on your screen.
  • Expand the Disk Drives and select your SSD from the list.
  • Right-click on it and click on Properties.
Update SSD Firmware

All information about the SSD can be found on the pop-up. You can then visit the manufacturer’s website to check if a new version of the firmware is available for your SSD. If yes, download and install it immediately to solve Windows 10 stop code DPC Watchdog Violation.

Use DISM Tool To Fix DPC_Watchdog_Violation Error

DISM refers to the Deployment Image Servicing and Management Tool, and it helps Windows users in servicing and creating Windows images. If you think your system’s health status is affected by third-party programs, settings, or any means, you can run this command to fix it. Doing so will restore all PC health-related issues in one go.

  • Open Start Menu & search for Command Prompt.
  • Right-click on CMD and click Run As Administrator.
  • Copy and paste the below command into the CMD window.
DISM /Online /Cleanup-Image /RestoreHealth
  • Press Enter to run the command.
DISM Restore Health
  • If the command executes properly, wait for the process to finish.
  • If the command is not executed, then run the 2 commands mentioned below:
Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

NOTE: Replace C:\RepairSource\Windows with your Windows Installation and Recovery Disk. Once done, restart your device to save changes.

Re-install Display Drivers

Well, you already know what a DPC watchdog violation is, but you don’t know that outdated drivers can also cause this issue. Most of the time, it is related to the graphics drivers, so you will have to re-install the graphics drivers. Updating them might not solve the issue, so you need to boot your device in safe mode and uninstall your drivers. Here’s how you can do it:

  • Press Windows Key + R and type MSConfig.
  • Press Enter, and a System Configuration window will appear.
  • Navigate to the Boot Tab.
  • Under Boot Options, check the Safe Boot option and select Network from the list.
Boot In Safe Mode
  • Click on Apply to save changes.
  • Restart your system and boot your PC in Safe Mode.
  • Once you have booted into Safe Mode, open Device Manager.
  • Click on Display Adapters and right-click on your Display Adapter.
  • Click on Uninstall, and tick mark Delete the driver software for this device, then on OK.
Reinstall Graphics Drivers
  • Restart your system in normal mode and install the latest graphics driver manually.

Check Hardware & Software Compatibility

Both hardware and software must be compatible with the version of Windows you are using. If one of them is incompatible, you will get a DPC watchdog violation error. For hardware compatibility, you can visit the manufacturer’s website to find out if it supports the Windows version you are using.

For software compatibility, you can right-click on the installed software and change Airtel WiFi password. Click on Properties and navigate to the Compatibility tab. You can either run Compatibility Troubleshooter to let Windows fix issues or configure settings yourself under Compatibility Mode to run the program as the previous version of Windows. This is a working dpc_watchdog_violation fix.

Software Compatibility

Use BlueScreenView To Find The Cause

BlueScreenView is an amazing third-party app developed by NirSoft that helps you in knowing more about every Blue Screen of Death error. Every time your system crashes with a BSOD error, this app saves information related to the crash and stores them in a table. You can then open it and know what caused the crash.

Apart from this app, Windows 10 saves the same information in the C:\Windows\Minidump folder. You can open it to get diagnostics information about the crashes that happened on your device. The same information can also be obtained from the Event Viewer tool of Windows, but BlueScreenView makes it easier to access the information.

NirSoft BlueScreenView

FAQs Related To DPC_Watchdog_Violation

What Is Microsoft Watchdog?

Watchdog on Windows is a type of timer that resets the system automatically. When hardware or software fails to work as it should, users might get a DPC Watchdog Violation error. There are many reasons behind it, as we have mentioned most of them in this post, along with the fixes to solve this issue.

Is Watchdog Violation A Virus?

Watchdog violation is certainly not caused by a virus, but there are some exceptions. Generally, it is related to faulty hardware and newly installed programs that are incompatible with the version of Windows you are using. Though, sometimes if a virus or malware tries to play with the system, you might get this error.

How Do I Fix DPC Watchdog Violation?

If your system goes into loop mode and doesn’t turn on after applying a fix. Try to boot your machine into Safe Mode or Safe Mode With Networking. Keep pressing the F8 key on Windows 7/8.1 to get the Safe Mode option. In Windows 10, the 4th boot will automatically give the Automatic Repair option.

What Is Watchdog Timeout Error?

Watchdog Timeout Error and Watchdog Violation Error are different as the timeout error is caused when the processor on Windows PC fails or freezes while trying to execute the given command. This clearly indicates that the timeout watchdog error is caused only by the overload on the processor, while the violation watchdog error does not.

How Do I Fix The Blue Screen of Death On Windows 10?

Re-plugging all connected hardware, uninstalling recently installed programs, updating drivers, running the CHKDSK command, etc., are some of the proven ways to fix BSOD watchdog violation errors on Windows 10, 8.1, and 7. Sometimes, you might need to dive deep into system settings to get rid of this error, so always follow a guide while doing it.

Final Words

So, this is all about the DPC Watchdog Violation error code 0x00000133, and we hope you are able to fix DPC error by following the methods mentioned above. There are more methods available out there to solve dpc_watchdog_violation Windows 8.1, but the methods we have mentioned above work best of all.

We will keep updating this post with more fixes for Windows DPC watchdog violation on boot, so keep visiting Danial Tech Blog to know about them. If you are still facing issues like nvlddmkm.sys Nvidia corporation dpc_watchdog_violation, feel free to ask us for help via the comments below.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *